您的瀏覽器不支援JavaScript功能，若網頁功能無法正常使用時，請開啟瀏覽器JavaScript狀態
跳到主要內容
:::
:::

科系成員  

基本資料表

洪仕育
049-2563489-3311
syhung@nkut.edu.tw
洪仕育個人照片

教師

專任師資
教授
學年度論文名稱
104T. H. Lin, S. Y. Hung, C. H. Hung, M. H. Shen, C. K. Chao, H. Yang, 2015, “A new fabrciation method for an asymmetric microlens array light control film using inclined exposure and an incomplete thermal reflow process,” Journal of the Chinese Institute of Engineers, 38(1), pp.85–92. (SCI),(SCI)
103Z. J. Lian, S. Y. Hung, M. H. Shen, H. Yang, 2014, “Rapid fabrication of semiellipsoid microlens using thermal reflow with two different photoresists,” Microelectronic Engineering, 115, pp.46–50. (SCI, Corresponding author)
103S. Y. Hung, T. Y. Chang, M. H. Shen, H. Yang, 2014, “Tilted microlens fabrication method using two photoresists with different melting temperatures,” Journal of Micromechanics and Microengineering, 24(1), 025013. (SCI, Corresponding author),(SCI)
102M. H. Shen, S. Y. Hung, 2013, “Analysis of a piezoelectric finite wedge under antiplane concentrated loads,” International Journal of Mechanical Sciences, 76, pp.1–8. (SCI),(SCI)
101M. H. Shen, S. Y. Hung,“Magnetoelectroelastic analysis of an arbitrary shape inclusion undergoing eigenfields and remote loadings,” International Journal of Solids and Structures, 49, pp.3808-3815.(SCI),(SCI)
101C. H. Hung, S. Y. Hung, M. H. Shen, H. Yang,“Semi-ellipsoid microlens fabrication method using the lift-off and alignment exposure processes,” Journal of Micromechanics and Microengineering, 22, 105020. (SCI, Corresponding author),(SCI)
101C. H. Hung, S. Y. Hung, M. H. Shen, H. Yang,“Semi-ellipsoid microlens fabrication method using UV proximity printing,” Applied Optics, 51, pp.1122-1130. (SCI, Corresponding author),(SCI)
101M. H. Shen, S. Y. Hung,“Piezoelectric screw dislocation in an arbitrarily shaped three-phase composite,” European Journal of Mechanics A/Solids, 32, pp.13-20. (SCI).,(SCI)
101M. H. Shen, C. P. Lin, S. Y. Hung,“Edge crack in front of anisotropic wedge interacting with anti-plane singularity,” Theoretical and Applied Fracture Mechanics, 58, pp.1-8. (SCI).,(SCI)
100T. H. Lin, H. Yang, C. K. Chao, S. Y. Hung, J. S. Hsu,“New high fill-factor dual-curvature microlens array fabrication using UV proximity printing,” Microsystem Technologies, 17(3), pp.601-607. (SCI Impact Factor: 0.912),(SCI)
99F. M. Chen, M. H. Shen, S. Y. Hung, “Analytical solutions for anisotropic heat conduction problems in a trimaterial with heat sources,” Journal of Heat Transfer, Transactions of the ASME, 132(9), 091302. (SCI Impact Factor:0.959),(SCI)
99M. H. Shen, F. M. Chen, S. Y. Hung, “Piezoelectric study for a three-phase composite containing arbitrary inclusion,” International Journal of Mechanical Sciences, 52(4), pp.561-571. (SCI Impact Factor:1.288),(SCI)
99M. H. Shen, F. M. Chen, S. Y. Hung, S. N. Chen,“Magnetoelectroelastic interaction between a generalized screw dislocation and multiple circular inclusions,” Journal of Mechanics, 26(3). pp.309-316. (SCI Impact Factor: 0.644),(SCI)
99C. K. Chao, J. Y. Hu, S. Y. Hung, H. Yang,“Theoretical Prediction of Fiber Coupling for Ellipsoidal Microlens,” Journal of Mechanics, 26(1). pp.29-36. (SCI Impact Factor: 0.644),(SCI)
98S. Y. Hung,“Optimization on hardness and internal stress of micro-electroformed NiCo/nano- Al2O3 composites with the constraint of low surface roughness,” Journal of Micromechanics and Microengineering, 19(1), pp.015001-015010. (SCI Impact Factor: 2.811, Corresponding author),(SCI)
98S. Y. Hung, Y. P. Chang, M. H. Shen,“Applying sequential neural-network approximation and orthogonal array algorithm to optimize the axial-flow cooling system for rapid thermal processes,” Semiconductor Science and Technology, 24(2), 025021. (SCI Impact Factor: 1.899, Corresponding author),(SCI)
98T. H. Lin, H. Yang, C. K. Chao, S. Y. Hung,“New high fill-factor triangular microlens array fabrication method using UV proximity printing,” Microsystem Technologies, 15(8), pp.1255-1261. (SCI Impact Factor: 0.912),(SCI)
98M. H. Shen, F. M. Chen, S. N. Chen, S. Y. Hung,“Piezoelectric study for a coated hole of quasi-polygonal shape in an infinite plate,” International Journal of Engineering Science, 47(3), pp.475-486. (SCI Impact Factor: 0.966),(SCI)
98Y. P. Chang, C. Y. Low, S. Y. Hung,“Integrated feasible direction method and genetic algorithm for optimal planning of harmonic filters with uncertainty conditions,” Expert Systems with Applications, 36(2), pp.3946-3955. (SCI Impact Factor: 1.177),(SCI)
98C. Y. Low, Y. P. Chang, S. Y. Hung,“An application of sequential neural-network approximation for sitting and sizing passive harmonic filters,” Expert Systems with Applications, 36(2), pp.2910-2920. (SCI Impact Factor: 1.177),(SCI)
97J. Y. Hu, C. P. Lin, S. Y. Hung, H. Yang, C. K. Chao,“Semi-ellipsoid microlens simulation and fabrication for enhancing optical fiber coupling efficiency,” Sensors and Actuators A: Physical, 147(1), pp.93-98. (SCI Impact Factor: 1.348),(SCI)
96S. Y. Hung, C. P. Lin, H. Yang, Y. P. Chang,“Optimal design using thermal reflow and caulking for fabrication of gapless microlens array mold inserts,” Optical Engineering, 46(4), pp.043402-1~8. (SCI Impact Factor: 0.757, Corresponding author),(SCI)
96S. Y. Hung, S. N. Chen, C. P. Lin, H. Yang,“The robust design for gapless microlens array fabrication using the incomplete developing and thermal reflow process,” Microwave and Optical Technology Letters, 49(1), pp.23-29. (SCI Impact Factor: 0.631, Corresponding author),(SCI)
96T. H. Lin, S. Y. Hung, H. Yang, C. K. Chao,“Fabrication of a microlens array electroformed mold with low roughness and high hardness,” Journal of Micromechanics and Microengineering, 17(3), pp.419-425. (SCI Impact Factor: 2.811, Corresponding author),(SCI)
96J. Su, J. C. Jeng, H. P. Huang, C. C. Yu, S. Y. Hung, C. K. Chao,“Control Relevant Issues in Semiconductor Manufacturing: An Overview with Some New Results,” Control Engineering Practice, 15(10), pp.1268-1279. (SCI Impact Factor: 1.263),(SCI)
95F. M. Chen, M. H. Shen, S. Y. Hung,“Circularly cylindrical layered media in antiplane piezoelectricity,” Journal of Physics D Applied Physics, 39(19), pp.4250-4256. (SCI Impact Factor: 2.2),(SCI)
94S. Y. Hung, C. K. Chao, T. H. Lin, C. P. Lin,“Applying ANN/GA algorithm to optimize the high fill-factor microlens array fabrication using UV proximity printing process,” Journal of Micromechanics and Microengineering, 15(12), pp.2389-2397. (SCI Impact Factor: 2.811, Corresponding author),(SCI)
94S. Y. Hung, C. K. Chao,“Thermal Stress Analysis for Rapid Thermal Process with Convective Cooling,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, 127(3), pp.564-571. (SCI Impact Factor: 0.595, Corresponding author),(SCI)
94S. Y. Hung, C. K. Chao, C. K. Hsu,“Lamp Design for Fast Cooling of Rapid Thermal Process with Two-Zone Lamp Using Step Cooling Process,” Semiconductor Science and Technology, 20(1), pp.72-79. (SCI Impact Factor: 1.899, Corresponding author),(SCI)
94陳世濃, 洪仕育, 林哲平, ”類神經網路應用於高填充率之六邊形微透鏡穩健化設計” 南開學報, 3(2), pp.7-18.,(SCI)
92C. K. Chao, S. Y. Hung, C. C. Yu,“Thermal Stress Analysis for Rapid Thermal Processor,” IEEE Transactions on Semiconductor Manufacturing, 16(2), pp.335-341. (SCI Impact Factor: 0.765),(SCI)
92C. K. Chao, S. Y. Hung, C. C. Yu,“The Effect of Lamps Radius on Thermal Stresses for Rapid Thermal Processing System,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, 125(3), pp.504-511. (SCI Impact Factor: 0.595),(SCI)
92C. K. Chao, S. Y. Hung,“Stress Analysis in the Vertical Bridgman Growth with the Modified Thermal Boundary Condition,” Journal of Crystal Growth, 256(1), pp.107-115. (SCI Impact Factor: 1.95, Cited: 3),(SCI)
90沈明河, 洪仕育, 白明昌, 陳世濃,“含橢圓形異質之平面熱彈性問題” 南開學報第六期, pp. 173-182.,(SCI)
學年度論文名稱
103Zhen-Jie Lian, Shih-Yu Hung, Ming-Ho Shen, Hsiharng Yang, 2014, “Tilted Microlens Fabrication Using the Lift-Off Method and Inclined Thermal Reflow Processes,” The 9th International Conference on Optics-photonics Design and Fabrication, February, 12-14, Tokyo, Japan.
103Zhen-Jie Lian, Shih-Yu Hung, Ming-Ho Shen, Hsiharng Yang, 2014, “Rapid Fabrication of Semiellipsoid Microlens Using Thermal Reflow with Two Different Photoresists,” The 9th International Conference on Optics-photonics Design and Fabrication, February, 12-14, Tokyo, Japan.
103Shih-Yu Hung, Yu-Ting Hung and Ming-Ho Shen, 2014, “Tilted Microlens Fabrication Using Nano-Magnetic Particles,” The 3rd International Conference on Nanostructures, Nanomaterials and Nanoengineering, December, 26-28, Hong Kong, China.
102S. Y. Hung and C. H. Hung, 2012, “An Evaluation of Photoresist Thickness for Semiellipsoid Microlens Fabrication before Thermal Reflow Using the Prolate Spheroid Approximation,” The 12th International Conference on Numerical Simulation of Optoelectronic Devices, August 28-31, Shanghai, China, P.67-P.68. (ISBN: 978-1-4673-1603-3),1970-01-01,1970-01-01,(SCI)
102T. H. Lin, S. Y. Hung, C. H. Hung, M. H. Shen and H. Yang, 2012, “Inclined Exposure and Incomplete Thermal Reflow Process for Fabricating Asymmetric Microlens Array,” Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS, April, 25-27, Cannes, France, P.214-P.217. (ISBN: 978-2-35500-020-1),1970-01-01,1970-01-01,(SCI)
102洪仕育, 連朕劼, 沈明河, 2011, “橢面微透鏡新製程開發與光纖耦合效率之研究,” 中國機械工程學會第二十八屆全國學術研討會, 台中, 民國一百年十二月.,1970-01-01,1970-01-01,(SCI)
102洪建欣, 洪仕育, 林宗鴻, 沈明河, 楊錫杭, 葉茂勳, 2011, “利用斜向曝光與不完全熱熔製程開發斜透鏡陣列之研究,” 中國機械工程學會第二十八屆全國學術研討會, 台中, 民國一百年十二月.,1970-01-01,1970-01-01,(SCI)
102陳世濃, 連朕劼, 柯凱琦, 洪仕育, 李怡欣, 2011, “點滴自動警示系統,” 中國機械工程學會第二十八屆全國學術研討會, 台中, 民國一百年十二月.,1970-01-01,1970-01-01,(SCI)
102C. H. Hung , S. Y. Hung, M. H. Shen, H. Yang, T. H. Lin, 2010, “Investigation on Hardness and Internal Stress of Nickel Composite Electroformed Mold for Microlens Array Fabrication,” The 12th International Congress on Mesomechanics, June 21-25, Taipei, Taiwan, P.121-P.124.,1970-01-01,1970-01-01,(SCI)
102M. H. Shen, S. Y. Hung, F. M. Chen, S. N. Chen, 2009, “Numerical Solutions for Anisotropic Heat Conduction Problems in a Trimaterial with Heat Sources,” The 16th National Computational Fluid Dynamics Conference, July 30- August 1, Yilan, Taiwan, I02, P.1-P.6.,1970-01-01,1970-01-01,(SCI)
102H. I. You, S. Y. Hung, C. K. Yu, C. S. Hung, 2009, “Investigation of the Intelligent Guide-Stick,” Conference on Gerontic Technology and Service Management, May 19-21, Nantou, Taiwan, P.165-P.169.,1970-01-01,1970-01-01,(SCI)
102洪仕育、沈明河、李怡欣、林哲平、洪建欣, 2008, “電動代步車防傾倒機構設計,” 中國機械工程學會第二十五屆全國學術研討會, 彰化, 民國九十七年十一月.,1970-01-01,1970-01-01,(SCI)
102洪仕育、洪建欣、沈明河、陳世濃、陳富謀, 2008, “電動代步車底盤結構破壞分析與改善,” 中國機械工程學會第二十五屆全國學術研討會, 彰化, 民國九十七年十一月.,1970-01-01,1970-01-01,(SCI)
102J. Y. Hu, C. P. Lin, S. Y. Hung, H. Yang, C. K. Chao, 2007, “Applying Taguchi method to optimize the semi-ellipsoid microlens simulation and fabrication for enhancing optical fiber coupling efficiency,” The 11th Nano Engineering and Microsystem Technology Conference, Aug. 30-31, Taichung, Taiwan.,1970-01-01,1970-01-01,(SCI)
102S. Y. Hung, M. H. Shen, S. N. Chen, F. M. Chen, 2007, “Study on fracture analysis and improvement for rapid thermal processing oven with upward-axial gas flow cooling,” The 14th National Computational Fluid Dynamics Conference, August 16-18, Chitou, Taiwan, C007, pp.1-7.,1970-01-01,1970-01-01,(SCI)
102C. P. Lin, S. Y. Hung, S. N. Chen, 2007, “Thermal stress analysis for rapid thermal processes with dual axial gas flow cooling,” International congress on Thermal Stresses, June 4-7, Taipei, Taiwan, pp.373-376,1970-01-01,1970-01-01,(SCI)
102C. L. Juoi, S. Y. Hung, M. H. Shen, S. N. Chen, C. P. Lin, 2007, “Development of an integral system for home robots using the machine vision technique,” Conference on Gerontic Technology and Service Management, March 26-27, Nantou, Taiwan, P.51-P.56.,1970-01-01,1970-01-01,(SCI)
102S. Y. Hung, M. H. Shen, T. L. Lee, S. N. Chen, 2006, “The robust and optimal quality design for gapless microlens array mold insert fabrication,” Proceedings of the 23rd National Conference on Mechanical Engineering, Nov. 24-25, Tainan, Taiwan, P.96-P.102.,1970-01-01,1970-01-01,(SCI)
102F. M. Chen, S. Y. Hung, M. H. Shen, S. N. Chen, C. P. Lin, 2006, “Piezoelectric Singularities in a Confocally Multicoated Elliptical Inclusion,” Proceedings of the 23rd National Conference on Mechanical Engineering, Nov. 24-25, Tainan, Taiwan, P191.-P.195.,1970-01-01,1970-01-01,(SCI)
102C. P. Lin, F. M. Chen, S. N. Chen, T. L. Lee, S. Y. Hung, 2006, “The Robust Design and Fabrication of Hexagonal Microlens Array Using a Thermal Reflow Method,” Proceedings of the 23rd National Conference on Mechanical Engineering, Nov. 24-25, Tainan, Taiwan, P.132-P.138.,1970-01-01,1970-01-01,(SCI)
102C. C. Yu, A. J. Su, J. C. Jeng, H. P. Huang, S. Y. Hung, C. K. Chao, 2006, “PSE Relevant Issues in Semiconductor Manufacturing: Application to Rapid Thermal Processing,” International Symposium on Advanced Control of Chemical Processes, International Federation of Automatic Control, April 2-5, Gramado, Brazil, pp. 601-608.,1970-01-01,1970-01-01,(SCI)
102L. S. Chao, S. Y. Hung, C. S. Hsueh, 1993, “Modeling Crystal Growth in Bridgman Furnace,” Proceedings of the First Pan-Pacific Conference on Computational Engineering, Seoul, Korea, pp. 475-480.,1970-01-01,1970-01-01,(SCI)
102趙隆山, 洪仕育, 1993, “布氏爐之熱與質量傳遞模式研究,” 中國機械工程學會第十屆全國學術研討會, 新竹市, 民國八十二年十一月, p 759.,1970-01-01,1970-01-01,(SCI)
學校名稱國別系所學位起迄年月
台灣科技大學 機械工程系 博士1999-09~2004-02
成功大學工程科學系碩士1991-09~1993-07
服務機關名稱單位職務期間
中鼎工程顧問公司1988-12~1989-12
Top